Control natural light, day or night with the ODL Solar Powered Dimmer
With the touch of a button, ODL's exclusive Tubular Skylight Solar Powered Dimmer lets you control the amount of natural light throughout your home like never before. Use the Solar Powered Dimmer's remote control to reduce moonlight in the bedroom, dim light in the nursery for naptime, or eliminate glare in the media room. Download these instructions (4.4 MB, Adobe PDF) or view this video to learn more about product features and installation.
|
Solar Powered Dimmer
Electric Light Kit
Diffusers
Extension Tubes
Dome Edge Protection Band
|
|
The three-button remote is easy to use and opens, closes, and stops the dimmer at any point. Use the dimmer for full light control and to turn the nightlight on and off.
-
Simple to install, with no hardwiring required. The dimmer can be retrofitted on all 10" Tubular Skylights and select competitor tube skylights as well.
-
Green friendly: The Solar Powered Dimmer is powered by a solar panel and four included rechargeable Ni-MH batteries.
-
Control natural light by placing Tubular Skylights throughout your house like never before—even in bedrooms, nurseries, and media rooms—thanks to the ability to fully or partially block light.
-
The night light feature provides unlimited adjustability and soft, subtle light with the 2-LED nightlight. (U.S. Patent No. D585, 365).
|
Solar Powered Dimmer
|
Extension Tubes: skylights in any space
For installations over 48".
Available in 20" and 48" lengths.
Tip: determine if you need extension tubes prior to starting installation.
| Skylight diameter |
Maximum length of tube run |
| 10" |
12' |
| 14" |
24' |
|
Extension Tubes—20" and 48" lengths
|
For roof assemblies with fire classifications, use a Dome Edge Protection Band
The ODL Dome Edge Protection Band protects the dome edge on roof assemblies with fire classifications of A, B, or C. Importantly, only the 10" or 14" diameter ODL Tubular Skylights with seamless aluminum flashing are approved for fire classifications of A, B, or C.
The Dome Edge Protection Band is not intended for use on formable aluminum or injection molded resin flashing. Dome Edge Protection Bands fit the following models:
10" models: EZ10SCMNH, EZ10SCPNH, EZ10PRO, EZ10PRO2, TS10ALUME, and TS10SVRWE.
14" models: EZ14SCMNH, EZ14SCPNH, EZ14PRO, EZ14PRO2, TS14ALUME, and TS14SVRWE.
Download the Dome Edge Protection Band installation instructions. (418 K, Adobe PDF).
|
Dome Edge Protection Band for roof assemblies with fire classifications
|