The Brisa Retractable Screen Door comes in five parts and requires only one tool (powerdrill/screwdriver) for installation. Brisa Retractable Screen Doors adjust quickly for 32"–36" doors with no cutting required. Doors less than 32" require two simple cuts with a hacksaw.
1. Assemble 5 Parts
The simple-to-install Quick-Snap Track can be snapped into the screen housing and adjusted to proper length without cutting, for doors 32"–36" wide. (For door widths less than 32", two simple cuts with a hacksaw are required.)
2. Place Screen onto Door Frame
Outer face-mount installation makes the door easy to square while providing maximum air flow and an unobstructed view and pass-through.
3. Secure Screen onto Door Frame
Secure screen onto door frame with one tool and eight screws.